Arahan
dari
Pendiri
UANM
(Universitas Agussalim Nasution Mandailing)
Agussalim, S.T. bin Abdur Rahim Nasution
Kisi-Kisi Materi KUANMET (Kuliah Universitas
Agussalim Nasution Mandailing Electronic
Teleconfence)
untuk
ke-GUBERNUR-an SUMATERA UTARA dari UANM (Universitas Agussalim Nasution
Mandailing) dengan Misi Abadi untuk Perdamaian Abadi Dunia
29 April 3000, Selasa, untuk
ke-GUBERNUR-an SUMATERA UTARA dari Penjadwalan Linimasa UANM KS MET
(Universitas Agussalim Nasution Mandailing Kuliah Sepanjang Masa Electronic
Teleconference) Tahun 3000 (tahun tiga ribu) Masehi ke Saat Ini (Now)
Tahun 2025, 975 (sembilan ratus tujuh
puluh lima) tahun, secara Arus Mudik, dari Kota Medan Reinkarnasi Ilmu Asia ke
Wajah Dunia Internasional Global Bumi, mewarisi Peradaban dengan Amal Jariyah
(Ilmu yang Bermanfaat) sebagai Tanggung Jawab Moral Kita untuk Generasi ke
Generasi Mendatang untuk Perdamaian Abadi Dunia khususnya untuk rakyat Provinsi
Sumatera Utara
April 29th,
3000, Tuesday,
for the GOVERNOR of NORTH SUMATERA from the Timeline Scheduling of Agussalim
Nasution Mandailing University Lecture Throughout Time Electronic
Teleconference Year 3000 (three thousands) AD to the Present (Now) Year 2025, 975
(nine hundreds and seventy five) years, through the Homecoming Flow, from the
City of Medan Reincarnation of Asian Knowledge to the Face of the Global
International World of the Earth, inheriting Civilization with Amal Jariyah
(Beneficial Knowledge) as Our Moral Responsibility for Future Generations for
Eternal World Peace especially for the people of North Sumatra Province
Universitas Agussalim Nasution
Mandailing (UANM)
Fakultas Ilmu dan Teknologi Kebumian
Jurusan Teknik Pertambangan
Materi Kuliah
Selasa, 29
April Tahun 3000 Masehi
Agussalim Nasution Mandailing
University (ANMU)
The Faculty of Earth Sciences and
Technology
The Mining Engineering Department
Lecture Material
Tuesday, April 29th,
3000 AD
KEPUTUSAN MENTERI ENERGI DAN SUMBER DAYA
MINERAL
REPUBLIK INDONESIA
NOMOR 1827 K/30/MEM/2018
TENTANG
PEDOMAN KAIDAH PERTAMBANGAN YANG BAIK
DECREE OF THE
MINISTER OF ENERGY AND MINERAL RESOURCES OF THE REPUBLIC OF INDONESIA
NUMBER 1827
K/30/MEM/2018
CONCERNING
GUIDELINES FOR
GOOD MINING PRACTICES
DENGAN RAHMAT TUHAN YANG MAHA ESA
MENTERI ENERGI DAN SUMBER DAYA MINERAL
BY THE GRACE OF
GOD ALMIGHTY
MINISTER OF
ENERGY AND MINERAL RESOURCES
LAMPIRAN
II KEPUTUSAN MENTERI ENERGI DAN
SUMBER DAYA MINERAL
REPUBLIK
INDONESIA
NOMOR : 1827 K/30/MEM/2018
TANGGAL : 7 Mei 2018
APPENDIX II DECREE OF THE MINISTER OF ENERGY AND MINERAL RESOURCES
REPUBLIC OF INDONESIA
NUMBER: 1827 K/30/MEM/2018
DATE: May 7th, 2018
PEDOMAN PENGELOLAAN TEKNIS PERTAMBANGAN
GUIDELINES FOR
MINING TECHNICAL MANAGEMENT
E.
KEGIATAN
E. ACTIVITIES
6.
PENAMBANGAN
6. MINING
e. Peralatan Penambangan
1) Umum
a) jenis, jumlah, dan kapasitas peralatan dilengkapi
dengan informasi unjuk kerja peralatan;
b) peralatan utama dan peralatan pendukung memenuhi
kelaikan teknis;
c) unjuk kerja peralatan meliputi:
(1) ketersediaan fisik atau physical availability (PA) adalah persentase waktu ketersediaan
yang dihitung berdasarkan perbandingan antara waktu kerja ditambah waktu tidak
beroperasi/tunggu dibagi dengan waktu kerja ditambah waktu tidak beroperasi/tunggu
dan waktu perbaikan.
Dimana:
W = Waktu kerja atau working hours (jam),
R = Waktu perbaikan atau repair hours (jam),
S = Waktu tidak operasi/tunggu atau standby hours (jam)
(2) ketersediaan mekanik atau Mechanical Availability (MA) adalah persentase waktu ketersediaan
yang dihitung berdasarkan perbandingan antara waktu kerja dibagi waktu kerja
ditambah waktu perbaikan.
Dimana:
W = Waktu kerja atau working hours (jam),
R = Waktu perbaikan atau repair hours (jam),
(3) Utilization
of Availability (UA) adalah persentase waktu ketersediaan yang dihitung
berdasarkan perbandingan antara waktu kerja dibagi waktu kerja ditambah waktu
tidak operasi/tunggu.
Dimana:
W = Waktu kerja atau working hours (jam),
S = Waktu tidak operasi/tunggu atau standby hours (jam)
(4) Effective Utilization
(EU) adalah persentase efektifitas penggunaan alat yang dihitung berdasarkan
perbandingan antara waktu kerja dibagi waktu kerja ditambah waktu tidak
operasi/tunggu dan waktu perbaikan.
Dimana:
W = Waktu kerja atau working hours (jam),
R = Waktu perbaikan atau repair hours (jam),
S = Waktu tidak operasi/tunggu atau standby hours (jam).
(5) pencapaian produktivitas adalah aktual produksi
per satuan waktu dibagi target produksi per satuan waktu dikali seratus persen.
d) Nilai unjuk kerja peralatan utama:
(1) ketersediaan fisik atau physical availability (pa) peralatan tambang paling kurang 90%
(sembilan puluh persen);
(2) ketersediaan mekanik atau mechanical availability (ma) peralatan tambang paling kurang 85%
(delapan puluh lima persen);
(3) ketersediaan penggunaan atau utilization of availability (ua) peralatan tambang paling kurang
75% (tujuh puluh lima persen);
(4) efektifitas penggunaan atau effective utilization (eu) peralatan tambang sekurang-kurangnya 65%
(enam puluh lima persen);
(5) pencapaian produktivitas peralatan tambang
sekurang-kurangnya mencapai 85% (delapan puluh lima persen) dari target
produktivitas yang telah ditetapkan;
e) dalam rangka menghindari antrian atau waktu tunggu
maka match factor/keserasian alat
muat dan angkut diupayakan mendekati satu;
f) dalam hal digunakan peralatan dengan teknologi
baru, mendapat persetujuan dari Direktur Jenderal;
g) peralatan utama tetap dilakukan pemeliharaan dan
perawatan untuk mempertahankan nilai mechanical
availability (MA) dari kondisi sejak tidak dioperasikan’
e. Mining Equipment
1) General
a) The type, quantity, and capacity of equipment are
accompanied by equipment performance information;
b) Main and supporting equipment meet technical
feasibility;
c) Equipment performance includes:
(1) Physical availability (PA) is the percentage of
available time calculated based on the ratio of working time plus idle/waiting
time divided by working time plus idle/waiting time and repair time.
Where:
W = Working time or working hours (hours),
R = Repair time or repair hours (hours),
S = Standby hours (hours)
(2) Mechanical availability (MA) is the percentage
of available time calculated based on the ratio of working time divided by
working time plus repair time.
Where:
W = Working time or working hours (hours),
R = Repair time or repair hours (hours),
(3) Utilization of availability (UA) is the
percentage of available time calculated based on the ratio of working time
divided by working time plus idle/waiting time.
Where:
W = Working hours (hours),
S = Standby hours (hours)
(4) Effective Utilization (EU) is the percentage of
equipment usage effectiveness calculated based on the ratio of working time
divided by working time plus idle/waiting time and repair time.
Where:
W = Working
hours (hours),
R = Repair hours (hours),
S = Standby hours (hours).
(5) Productivity achievement is the actual
production per unit of time divided by the target production per unit of time
multiplied by one hundred percent.
d) Main equipment performance values:
(1) Physical availability (pa) of mining equipment
is at least 90% (ninety percent);
(2) Mechanical availability (ma) of mining equipment
is at least 85% (eighty-five percent);
(3) the availability of mining equipment (ua) is at
least 75% (seventy-five percent);
(4) the effectiveness of mining equipment (eu) is at
least 65% (sixty-five percent);
(5) the productivity of mining equipment is at least
85% (eighty-five percent) of the established productivity target;
e) to avoid queues or waiting times, the match
factor/compatibility of loading and transport equipment is attempted to be as
close to one as possible;
f) if equipment with new technology is used,
approval from the Director General is obtained;
g) main equipment continues to be maintained and
serviced to maintain the Mechanical Availability (MA) value from the condition
when it was not operated.
Agussalim, S.T. bin Abdur Rahim Nasution
Pendiri
UANM
(Universitas Agussalim Nasution Mandailing)
The
Founder
of
ANMU
(Agussalim
Nasution Mandailing University)
Tidak ada komentar:
Posting Komentar