Arahan
dari
Pendiri
UANM
(Universitas Agussalim Nasution Mandailing)
Agussalim, S.T. bin Abdur Rahim Nasution
Kisi-Kisi Materi KUANMET (Kuliah Universitas
Agussalim Nasution Mandailing Electronic
Teleconfence)
untuk
ke-GUBERNUR-an SUMATERA UTARA dari UANM (Universitas Agussalim Nasution
Mandailing) dengan Misi Abadi untuk Perdamaian Abadi Dunia
01 Mei 3000, Kamis, untuk
ke-GUBERNUR-an SUMATERA UTARA dari Penjadwalan Linimasa UANM KS MET
(Universitas Agussalim Nasution Mandailing Kuliah Sepanjang Masa Electronic
Teleconference) Tahun 3000 (tahun tiga ribu) Masehi ke Saat Ini (Now)
Tahun 2025, 975 (sembilan ratus tujuh
puluh lima) tahun, secara Arus Mudik, dari Kota Medan Reinkarnasi Ilmu Asia ke
Wajah Dunia Internasional Global Bumi, mewarisi Peradaban dengan Amal Jariyah
(Ilmu yang Bermanfaat) sebagai Tanggung Jawab Moral Kita untuk Generasi ke
Generasi Mendatang untuk Perdamaian Abadi Dunia khususnya untuk rakyat Provinsi
Sumatera Utara
May 01st,
3000, Thursday,
for the GOVERNOR of NORTH SUMATERA from the Timeline Scheduling of Agussalim
Nasution Mandailing University Lecture Throughout Time Electronic
Teleconference Year 3000 (three thousands) AD to the Present (Now) Year 2025, 975
(nine hundreds and seventy five) years, through the Homecoming Flow, from the
City of Medan Reincarnation of Asian Knowledge to the Face of the Global
International World of the Earth, inheriting Civilization with Amal Jariyah
(Beneficial Knowledge) as Our Moral Responsibility for Future Generations for
Eternal World Peace especially for the people of North Sumatra Province
Universitas Agussalim Nasution
Mandailing (UANM)
Fakultas Ilmu dan Teknologi Kebumian
Jurusan Teknik Pertambangan
Materi Kuliah
Kamis, 01
Mei Tahun 3000 Masehi
Agussalim Nasution Mandailing
University (ANMU)
The Faculty of Earth Sciences and
Technology
The Mining Engineering Department
Lecture Material
Thursday, May 01st,
3000 AD
KEPUTUSAN MENTERI ENERGI DAN SUMBER DAYA
MINERAL
REPUBLIK INDONESIA
NOMOR 1827 K/30/MEM/2018
TENTANG
PEDOMAN KAIDAH PERTAMBANGAN YANG BAIK
DECREE OF THE
MINISTER OF ENERGY AND MINERAL RESOURCES OF THE REPUBLIC OF INDONESIA
NUMBER 1827
K/30/MEM/2018
CONCERNING
GUIDELINES FOR
GOOD MINING PRACTICES
DENGAN RAHMAT TUHAN YANG MAHA ESA
MENTERI ENERGI DAN SUMBER DAYA MINERAL
BY THE GRACE OF
GOD ALMIGHTY
MINISTER OF
ENERGY AND MINERAL RESOURCES
LAMPIRAN
II KEPUTUSAN MENTERI ENERGI DAN
SUMBER DAYA MINERAL
REPUBLIK
INDONESIA
NOMOR : 1827 K/30/MEM/2018
TANGGAL : 7 Mei 2018
APPENDIX II DECREE OF THE MINISTER OF ENERGY AND MINERAL RESOURCES
REPUBLIC OF INDONESIA
NUMBER: 1827 K/30/MEM/2018
DATE: May 7th, 2018
PEDOMAN PENGELOLAAN TEKNIS PERTAMBANGAN
GUIDELINES FOR
MINING TECHNICAL MANAGEMENT
E.
KEGIATAN
E. ACTIVITIES
6.
PENAMBANGAN
6. MINING
c. Tambang Bawah Tanah (halaman 103)
c.
Underground Mining (page 103)
3) Pelaksanaan (halaman 105)
3)
Implementation (page 105)
h) Penyangga Alami (halaman 112)
(1) Kepala Teknik Tambang membuat kajian
teknis untuk menentukan dimensi dan jumlah penyangga alami;
(2) kajian teknis tersebut paling kurang memuat:
(a) peruntukan lubang bukaan;
(b) sifat fisik dan mekanik massa batuan;
(c) dimensi lubang bukaan;
(d) beban yang disangga;
(e) struktur geologi;
(f) hidrogeologi;
(g) jumlah minimum dan kekuatan tiap penyangga alami;
dan
(h) rekomendasi hasil kajian teknis;
(3) kajian teknis tersebut disampaikan
dalam laporan khusus kepada Kepala Inspektur Tambang;
h)
Natural Supports (page 112)
(1)
The Head of Mining Engineering conducts a technical study to determine the
dimensions and number of natural supports;
(2)
The technical study shall include at least:
(a) the
designation of the opening;
(b) the
physical and mechanical properties of the rock mass;
(c) the
dimensions of the opening;
(d) the load
to be supported;
(e) the
geological structure;
(f) the
hydrogeology;
(g) the
minimum number and strength of each natural support; and
(h)
recommendations based on the results of the technical study;
(3)
The technical study shall be submitted in a special report to the Chief Mining
Inspector;
i) Amblesan Permukaan (Surface Subsidence)
(1) dalam melakukan penambangan bawah
tanah, Kepala Teknik Tambang menyampaikan kajian teknis amblesan permukaaan
kepada Kepala Inspektur Tambang yang paling kurang memuat:
(a) daerah pengaruh (influence area) termasuk prediksi luasan dan kedalaman amblesan;
(b) keterdapatan sumber air permukaan dan air tanah;
(c) struktur geologi lokal;
(d) geometri dan dimensi bijih atau batubara yang akan
ditambang;
(e) kedalaman minimal rencana bukaan tambang bawah
tanah untuk produksi dari permukaan;
(f) rekomendasi sistem penyanggaan termasuk dimensi
dan jumlah penyangga alami; dan
(g) rancangan tambang bawah tanah;
(2) daerah pengaruh paling kurang 55⁰
(lima puluh lima derajat) dari garis vertikal bagian terluar area produksi
dengan mempertimbangkan kondisi massa batuan di atas rencana area produksi;
(3) dilarang melakukan penambangan bawah
tanah dengan metode penambangan ambrukan (caving)
dan/atau longwall mining yang di
atasnya merupakan daerah pengaruh yang terdapat infrastruktur, pemukiman, lahan
pertanian, situs bersejarah dan tempat yang dikeramatkan, sungai serta danau,
dan sejenisnya;
(4) kedalaman minimal rencana bukaan tambang
bawah tanah untuk produksi dari permukaan sekurang-kurangnya 200 (dua ratus)
meter atau berdasarkan kajian teknis;
(5) kajian teknis tersebut disampaikan
dalam laporan khusus kepada Kepala Inspektur Tambang;
(6) Kepala Teknik Tambang menetapkan
tata cara baku pengawasan surface
subsidence paling kurang metode pemantauan, program pemantauan, evaluasi,
dan tindak lanjut hasil evaluasi;
(7) tata cara baku dan hasil
pengawasannya disampaikan setiap 6 (enam) bulan kepada Kepala Inspektur
Tambang;
(8) dalam hal terjadi amblesan permukaan
(subsidence), segala akibat yang
timbul dari kejadian tersebut menjadi tanggung jawab penuh oleh Pemegang IUP
atau IUPK;
i)
Surface Subsidence
(1)
When conducting underground mining, the Head of Mining Engineering shall submit
a technical study of surface subsidence to the Chief Mining Inspector, which
shall include at least:
(a) the
influence area, including the predicted extent and depth of subsidence;
(b) the
availability of surface and groundwater sources;
(c) the local
geological structure;
(d) the
geometry and dimensions of the ore or coal to be mined;
(e) the
minimum depth of the planned underground mine opening for surface production;
(f)
recommendations for a support system, including the dimensions and number of natural
supports; and
(g) the
underground mine design;
(2)
the influence area shall be at least 55° (fifty-five degrees) from the vertical
line of the outermost part of the production area, taking into account the
condition of the rock mass above the planned production area;
(3)
Underground mining using caving and/or longwall mining methods is prohibited in
areas of influence containing infrastructure, settlements, agricultural land,
historical sites and sacred places, rivers and lakes, and the like;
(4)
The minimum planned depth of underground mine openings for production from the
surface is at least 200 (two hundred) meters or based on a technical study;
(5)
The technical study is submitted in a special report to the Chief Mining
Inspector;
(6)
The Chief Mining Engineer establishes standard procedures for monitoring
surface subsidence, including at least monitoring methods, monitoring programs,
evaluations, and follow-up actions on evaluation results;
(7)
Standard procedures and monitoring results are submitted every 6 (six) months
to the Chief Mining Inspector;
(8)
In the event of surface subsidence, all consequences arising from this incident
are the full responsibility of the Mining Business Permit or Special Mining
Business Permit holders;
Agussalim, S.T. bin Abdur Rahim Nasution
Pendiri
UANM
(Universitas Agussalim Nasution Mandailing)
The
Founder
of
ANMU
(Agussalim
Nasution Mandailing University)
Tidak ada komentar:
Posting Komentar